Detail PS-202 Dual TDS Controller
The PS-202 allows for continuous and simultaneous monitoring and control of TDS levels on two water lines.
FEATURES
• Simultaneously monitors and controls the TDS levels of two water lines ( e.g., the feed water and product water) for high output commercial systems.
• Large, bright L.E.D. displays.
• An alarm will sound if the TDS level rises above the user-set level for both lines.
• Installs easily in minutes.
• Includes two 1/ 2" sensor probes ( at no extra cost) .
SPECIFICATIONS
Range: 0 - 999ppm
Accuracy: ± 2%
Conversion Factor: NaCl ( avg. 0.5)
Resolution: 1 PPM
ATC: Yes ( 1 - 65 degrees Celsius)
Calibration: Adjustable
Setting: Controlled by on-screen up/ down buttons
Relay Control: The unit will open or close a circuit via dry contacts when the ppm level of the output water ( line 2) or input water ( line 1) reaches or exceeds its control setting ( simple switch) . The PS-202 can be used to control one or two pumps, solenoid valves or other device.
Relay Voltage: 5V
Alarm: Steady beep for both lines
Display: Bright 5/ 8" L.E.D. dual displays
2 Probes: 1/ 2" bushing, 3 meter ( 9.8 ft) shielded cable
Power supply: AC 110V / AC 220V
Dimensions: 9.4 x 9.4 x 12.5 cm ( 3.7 x 3.7 x 4.9 in.)
Monitor Weight: 569.8 g ( 1 lb 4.1 oz)
Total Weight: 938.4 g ( 2 lbs 1.1 oz)
Tampilkan Lebih Banyak