Multi Function Network Cable Tester NF8208

Feature: 1. One person enough to complete cable continuity check. 2. The function of probing the audio and tracing the cable. 3. Check network cable faults, such as open , short , jumper wire, reverse connection or cross-talk interference. 4. Measure cable length and determine the distance of open and short circuit. 5. Dynamically calibrate cable length and make length measurement as accurate as 95% . 6. Far-end recognizer with prompting voice. 7. Self-checking function and automatically compensate any change in battery capacity or ambient temperature. 8. Single board computer software watchdog design and reliable operation. Specifications: ( 1) . Overall dimension: Main tester: 180× 80× 40mm; receiver: 218× 46× 29mm; Remote identifier: 77× 31× 21mm. ( 2) . Power: Main tester uses 6V DC for power supply; Receiver uses 9V battery for power supply . ( 3) . Display: Special 4 x 16 character big screen LCD lattice ( valid visual field 61.6 x 25.2mm) . ( 4) . Type of cable tested: STP/ UTP twin twisted cable, coaxial cable, telephone line. ( 5) . Type of cable detected: 5E, 6E, telephone wire, coaxial cable and other metal wires. ( 6) . Ambient temperature in work: -10º C~ + 60º C ( 7) . Tester Port: Tester RJ45 master port ( M) , tester LOOPBACK RJ45 port ( L) , hunting RJ45 port ( SCAN) ; Remote identifier RJ45 port ( R) , The extra BNC and RJ11 converters are used to measure and check the continuity of coaxial cable and telephone line. ( 8) . Length Measurement of Twin Twisted Cable: Scope: 1~ 350 M ( 3 ~ 200 ft) ; Calibration accuracy: 3% ( + / - 0.5M or + / - 1.5 ft) ( calibrating cable > 5M) ; Shipment accuracy: 5% ( + / - 0.5M or + / - 1.5 ft) . ( AMP, AT& T Class 5 cable) Display: M or ft. ( 9) . Length Calibration: User can set calibration factor by himself with a given length cable. The length of calibrating cable is more than 5M. ( 10) . Wire Sequence and Locating Cable Error: Check errors such as open circuit, short circuit, reverse connection, cross-over or cross-talk interference. ( 11) . Locating Cable: 8 Remote identifier test jacks ( ID 1 e ID 8) . ( 12) . Automatic Time-delay Shut Off Time: The tester does not operate for 30 minutes.