Detail E1 Datacom Transmission Analyzer XG2330
Features:
E1/ Datacom Transmission Analyzer, which perfectly combines E1 and Datacom testing functions together, is a handheld test unit with large color touch screen and designed for performing comprehensive analysis, measurement and evaluation of the transmission quality of the telecom circuit with E1 and Datacom interfaces. Besides the basic E1 and Datacom BIT Error Ratio Test ( BERT) functions, the E1/ Datacom Transmission Analyzer not only supports the E1 frame data monitoring& analysis, double E1 channels testing, loop delay, APS delay, pulse measurement, jitter measurement, signal level measurement, but also have many enhanced test functions such as " PCM Simulator" , " Mux/ Demux" , " Drop & Insert" , " Network Tools" .
It supports more than 10 types of various telecom and datacom interfaces which are widely used in digital network and perform quality testing in transmission, access and datacom network. It is suitable for R& D, manufacturing, installation, acceptance and maintenance testing of SDH, PDH, PCM, digital communication equipment and multi-protocol interface converters.
Functions:
1) E1 testing
? Out-of-service framed and unframed testing
? In-service framed and unframed testing
? Round trip delay measurement
? APS delay measurement
? PCM simulator
? Extensive error insertion and alarm generation
? VF tone generation and measurement, Listen/ Talk capability
? Frequency, offset and level measurements
? Clock slip measurement
? Transmit clock deviation up to 999ppm
? Double E1 channel BER testing and timeslot analysis
? Pulse Mask Measurement
2) IP PING, TRACE testing
3) Optional functions
? Datacom testing ( support V.24, V.35, V.36, X.21, RS-449, RS-485, EIA-530, EIA-530A interfaces)
? Jitter testing
? Mux & Demux
? Drop & Insert
? G.703 64kb/ s Co testing
4) Others
? Testing pattern: PRBS, Fixed Code, 16-BIT User-programmable word
? Performance analysis according to G.821, G.826, and M.2100
? Manual or auto-timer measurement
? LED Alarm and status indication
? Real-time clock
? Real-time transmit circuit status indication: open/ short
? Test results uploaded, conserved and printed by software via USB cable connected to PC
? Upgrade embedded software for free
Specifications:
E1 testing
1. Line code: HDB3, AMI
2. Internal clock: 2048Kb/ s 10ppm
3. Frame type: Unframed, PCM30, PCM30CRC, PCM31, PCM31CRC
4. Line interface: 75& ( Unbalance) , 120& ( Balance) , High Input Impedance> 2K&
5. Pulse mask test: Comply with ITU-T G.703 recommendations
6. Jitter test: Comply with ITU-T G.823, O.172 recommendations
Datacom testing
1. Datacom interface: V.24, V.35, V.36, X.21, RS-449, RS-485 EIA-530, EIA-530A
2. Datacom transmission mode: SYNC: 1.2Kb/ s~ 38.4Kb/ s, Nx64Kb/ s ( N= 1~ 32) , ASYNC: 50b/ s~ 57.6Kb/ s
3. Datacom device mode: DTE, DCE
G.703 64k Co testing
1. Rate: 64kb/ s 100ppm
2. Line interface: 120 ( balance) , AMI line code
Ethernet testing
Full duplex, 10/ 100M compatible
Error Insertion
1.Type: BIT, FAS, CODE, CRC4, E-BIT
2. Mode: Off, Single, Rate
Dimension: 233 x 110 x 64mm
Operating Temperature: 0 ^ 50
Storage Temperature: -30 ^ 70
Humidity: 5% ^ 95% non-condensing
Weight: 800g
Tampilkan Lebih Banyak