Detail RO System Conductivity Controller ROC-2313
1. Power voltage: AC 220V 15% 50Hz, Power consumption: d3W 2. Environment conditions: temperature: 0^ 50 ; humidity: d85% RH 3. Measuring range: 0^ 200 S / cm; accuracy: 1.5 level 4. Load capacity of output contact: 3A/ 250V AC ( the magnetic valve should be driven through intermediate relay) 5. Operation pressure of conductance cell: 0^ 0.5Mpa 6.Medium temperature: 5^ 50 7.Temperature compensation: automatic temperature with 25 as reference temperature 8. Distance of measuring range: less than 30m ( the ex-factory configuration of electrode cable is 5m unless there is a special agreement) 9. Display mode: 3 1/ 2-digit LED digital display 10. Electrode selected: 1.0cm-1 11. outline dimensions: 96 96 110mm ( height width depth) 12.meter board hole: 92 92mm ( height width) The instrument is a combined control instrument of a reverse osmosis controller and an on-line conductivity instrument. It can perform the operation test, status control and on-line monitoring of water quality conductivity ( combining PLC controller and conductivity meter) . It takes multiple anti-interference measures, adopts unique process flow and graphical control panel with LED indicator lamp embedded, the interface is friendly; menu-driven operation is used, multiple groups of parameters can be set and modified, the requirements of automatic operation are met.
Tampilkan Lebih Banyak